|
![[M-2000 Front]](graphics/tc-m2000.jpg)
Technical Specifications
Analog In
- Connectors: XLR
balanced
- Impedance: 15KOhm
- Sensitivity @
12dB headroom: -22dBu - 10 dBu
- A to D conversion:
20 bit (64x oversampling)
- Dynamic Range:
> 105 dB
- THD: 0.003% @
1kHz, +10 dB
- Frequency Response:
10 Hz - 20 kHz
- Crosstalk: -60
dB max.
|
Analog Out
- Connectors: XLR
balanced
- Impedance: 100
Ohm
- A to D conversion:
20 bit (64x oversampling)
- Dynamic Range:
> 96 dB
- THD: 0.003% @
1kHz, +10 dB
- Frequency Response:
10 Hz - 20 kHz
- Crosstalk: -60
dB max.
|
Digital In/Out
- AES/EBU In/Out:
XLR
- S/PDIF In/Out:
Coaxial, RCA
- Formats: EIAJ
CP-340, IEC 958, S/PDIF (20 Bit), AES/EBU (24 bit)
- Sample Rates:
32 kHz, 44.1 kHz, 48 kHz
|
PCMCIA Interface
- Connector: PCMCIA
Type 1 Cards
- Standards: PCMCIA
2.0, JEIDA 4.0
- Card Format: Supports
up to 2Mb SRAM
|
Control Interface
- MIDI: IN/Out/Thru
- Connector: 5 pin
DIN
- Pedal: 1/4" Phone
Jack
|
General
- Finish: Black
Anodized Aluminum & Painted and plated steel chasis.
- Dimensions: 19"
x 1.75" x 8.2"
- Humidity: Max.
95% non-condensing
|
The
T.C. Electronics Reverb Processor can operate as a dual mono engine
or true stereo reverb unit. It has balanced XLR analog I/O's, and SPDIF
and AES/ EBU digital I/O's. After the first gig with this unit, I knew
that this is a truly great box. Within 15 minutes I was able to get
around the unit very easily. Everything is laid out with an intuitive
genius. Through just one step of keys you can access every parameter,
the routing, the I/O, the patch editing and so on. The wizard function
is also very impressive, by answering a few questions, such as (reverb,
delay, effect) and (vocal, instrument, other) the unit will line up
all of the patches that fit the criteria of your choice. It even has
a very high quality built in tuner.
It
is this attention to detail that make this box so impressive. Oh, and
by the way, the sounds coming out are nothing less than drop dead spectacular.
Needless to say it is out on rental or demo quite a bit! If you have
any other questions, or would like a demo please feel free to write
or call.
But don't take our word
for it, Visit their Web Site: http://www.tcelectronic.com
If you would like additional
Information on this you may contact Klay@klay.com
or dial (in US) 1-800-FOR-KLAY.
|